MODELING AND SIMULATION OF MATRIX CONVERTER FOR WIND POWER GENERATION

Authors

  • F. Masood Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan
  • T. Mahmood Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan
  • M. A. Choudhry Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan

Abstract

In this paper, a matrix converter structure is proposed which is suitable for wind power generation applications. The matrix converter (MC) is the most general converter type in the family of AC-AC converters. It is a single-stage converter which has an array of m×n bidirectional power switches to connect, directly, an m-phase voltage source to an n-phase load. It does not have any DC-link circuit and does not need any large energy storage elements. The key element in a matrix converter is the fully controlled four-quadrant bidirectional switch, which allows high-frequency operation. The proposed converter uses MOSFETs as bidirectional switches. The model has been implemented using MATLAB/SIMULINK. The results obtained are presented. The waveforms for input current and output voltage are sinusoidal with very low total harmonic distortion (THD). Low THD is an indication that the model is suitable for wind power generation applications. The simulation results confirm the reduction of conversion losses by 10% to 12% as compared to conventional two stage converters thereby increasing the overall conversion efficiency. The MOSFETs which have been used as switching devices have four to five times more switching frequency as compared to IGBTs thus improving the resulting wave shapes.

References

N. Taib, B. Metidji and T. Rekioua, Electrical

Power and Energy Systems 53 (2013) 287.

R. Cardenas, R. Pena and P. Wheeler,

Electric Power Systems Research 103

(2013) 49.

Md. Arifujjaman, Renewable Energy 57

(2013) 348.

M. Y. Lee, P. Wheeler and C. Klumpner,

IEEE Transactions on Industrial Electronics

, No. 10 (2010) 3385.

H. H. Lee, H. M. Nguyen and T. W. Chun,

Journal of Power Electronics 8, No. 1 (2008)

E. Erdem, Y. Tatar and S. Sünter, Modeling

and Simulation of Matrix Converter using

Space Vector Control Algorithm, EUROCON

, The international Conference on

Computer as a Tool 2 (2005) pp.1228-1231).

J. Bauer, Acta Polytechnica 49, No. 2 (2009)

K. P. Astad and M. Molinas, Direct AC/AC

Power Converter for Wind Power Application;

th IEEE Mediterranean Electrotechnical

Conference (2010) pp. 113-118.

F. Deng and Z. Chen, A New Structure

Based on Cascaded Multilevel Converter for

Variable Speed Wind Turbine, 36th

Annual

Conference on IEEE Industrial Electronics

Society (2010) pp. 3167-3172.

D. Nelles and C.Tuttas, Equivalent Circuits of

Power Electronic Converters, International

Conference on Power System Transients,

Hungary (June 1999) pp. 584-589.

A. Latif, and A. M. Shaban, A Matlab/

Simulink Based tool for Power Electronic

Circuits, Proceedings of World Academy of

Science, Engineering and Technology 37,

(January 2009) pp. 274-279.

J. A. Baroudi, V. Dinavahi and A. M. Knight,

A Review of Power Converter Topologies for

Wind Generators, Renewable Energy 32

(2007) pp.2369-2385.

B. K. Bose, IEEE Transactions on Industrial

Electronics 56, No. 2 (2009) 581.

L. N. Raghuram and H. J. Suresh,

International Journal on Electronic and

Electrical Engineering 13, No. 1 (2010) 13.

D. Casini, and G. Marola, A Simple Power

Converter for Variable Speed Wind Turbine,

IEEE International Conference on Clean

Electrical Power (June 2009) pp. 604-608.

Y. Sozer and D. A. Torrey, IEEE

Transactions on Power Electronics 24, No.

(2009) 2475.

F. Blaabjerg, Z. Chen and S.B. Kjaer, IEEE

Transactions on Power Electronics 19, No. 5

(2004) 1184.

M. Elbuluk and N. R. N. Idris, The Role of

Power Electronics in Future Energy Systems

and Green Industrialization, 2nd IEEE

International Conference on Power and

Energy, Johor Baharu, Malaysia (December

pp.1 - 6.

L.H. Hansen, L. Helle, F. Blaabjerg, E.

Ritchie, S. M. Nielsen, H. Bindner, P.

Sorensen and B. Bak-Jensen, Conceptual

Survey of Generators and Power Electronics

for Wind Turbines, Risø National Laboratory,

Roskilde, Denmark (December 2001) A

Technical Report.

M. Jasinski, P. Okon and M.P. Kazmierkowski, Control of Grid Interfacing AC - DC -

AC Converter for Variable Speed Energy

Generation under Unbalanced and Distorted

Voltage Conditions, 4th International

Conference and exhibition on Ecologic

Vehicles and Renewable Energies

(March 26 – 29 2009).

Downloads

Published

10-09-2013

How to Cite

[1]
F. Masood, T. Mahmood, and M. A. Choudhry, “MODELING AND SIMULATION OF MATRIX CONVERTER FOR WIND POWER GENERATION”, The Nucleus, vol. 50, no. 3, pp. 253–260, Sep. 2013.

Issue

Section

Articles

Most read articles by the same author(s)

<< < 1 2