Structural, Electronic, Magnetic, and Thermoelectric Properties of Cr-doped DPs Cs2GeX6 (X= Cl, Br): DFT calculations
DOI:
https://doi.org/10.71330/thenucleus.2026.1520Abstract
Physical properties of chromium-doped halide double perovskites (DPs) Cs2GeX6 (X= Cl, Br) are estimated with respect to the DFT-based software Wein2k. These materials can be selected for solar cells and photovoltaics owing to their non-toxicity and ecological sustainability. Density functional theory (DFT) calculations investigate the physical characteristics of halides A2BX6 (A=Cs; B=Ge; X=Cl, Br), both pure and Cr-doped, which can potentially be applied to thermoelectric applications. Formation conditions and tolerance factors ensure the material's structural and thermodynamic feasibility. The band gap of the material Cs2GeCl6 is 4.5 eV; the same for the doped one Cs2Ge0.75Cr0.25Cl6 is 4.1 eV; the band gap of the material Cs2GeBr6 is 3.0 eV, while that of the doped material Cs2Ge0.75Cr0.25Br6 is 2.5 eV. Cs2Ge0.75Cr0.25Cl6 and Cs2Ge0.75Cr0.25Br6 have indirect band gaps, respectively. Furthermore, when the chromium doping ratio increases, so do the equilibrium lattice parameters of Cs2GeCl6 and Cs2GeBr6. Cs2GeCl6: 10.32 Å, Cs2Ge0.75Cr0.25Cl6: 10.55 Å, and Cs2GeBr6: 10.65 Å, Cs2Ge0.75Cr0.25Br6: 10.85 Å are the calculated lattice parameters. Both compounds have the same total magnetic moment values with 25% Cr doping for Cs2Ge0.75Cr0.25Cl6 and Cs2Ge0.75Cr0.25Br6. As a result, all of the halides investigated are commonly employed in thermoelectric devices. Thermal conductivity, electrical conductivity, and the Seebeck coefficient are also used to investigate thermoelectric properties. The computed values for PF at 200 K are PF=1.90 and 1.85 , and PF=3.98 and 4.09 at 800 K are measured for Cs2Ge0.75Cr0.25Cl6 and Cs2Ge0.75Cr0.25Br6, respectively, highlighting their importance in thermoelectric applications. The Seebeck coefficient value drops as temperature increases.
References
Q. A. Akkerman and L. Manna, “What defines a halide perovskite?” ACS Energy Lett., vol. 5, no. 2, pp. 604–610, 2020, doi: 10.1021/acsenergylett.0c00039.
Q. Tai, K. C. Tang, and F. Yan, “Recent progress of inorganic perovskite solar cells,” Energy Environ. Sci., vol. 12, pp. 2375–2405, 2019, doi: 10.1039/C9EE01479A.
R. Wang, M. Mujahid, Y. Duan, Z. K. Wang, J. Xue, and Y. Yang, “A review of perovskites solar cell stability,” Adv. Funct. Mater., vol. 29, Art. no. 1808843, 2019, doi: 10.1002/adfm.201808843.
J. Zhang, Z. Zhao, Z. Xia, and L. Dai, “A metal-free bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions,” Nat. Nanotechnol., vol. 10, pp. 444–452, 2015, doi: 10.1038/nnano.2015.48.
T. R. Cook, D. K. Dogutan, S. Y. Reece, Y. Surendranath, T. S. Teets, and D. G. Nocera, “Solar energy supply and storage for the legacy and nonlegacy worlds,” Chem. Rev., vol. 110, no. 11, pp. 6474–6502, 2010, doi: 10.1021/cr100246c.
A. E. Fedorovskiy, N. A. Drigo, and M. K. Nazeeruddin, “The role of Goldschmidt’s tolerance factor in the formation of A2BX6 double halide perovskites and its optimal range,” Small Methods, vol. 4, Art. no. 1900426, 2020, doi: 10.1002/smtd.201900426.
G. Catalan and J. F. Scott, “Physics and applications of bismuth ferrite,” Adv. Mater., vol. 21, pp. 2463–2485, 2009, doi: 10.1002/adma.200802849.
M.-G. Ju, M. Chen, Y. Zhou, H. F. Garces, J. Dai, L. Ma, N. P. Padture, and X. C. Zeng, “Earth-abundant nontoxic titanium(IV)-based vacancy-ordered double perovskite halides with tunable 1.0 to 1.8 eV bandgaps for photovoltaic applications,” ACS Energy Lett., vol. 3, pp. 297–304, 2018, doi: 10.1021/acsenergylett.7b01167.
P. K. Kung, M. H. Li, P. Y. Lin, J. Y. Jhang, M. Pantaler, D. C. Lupascu, G. Grancini, and P. Chen, “Lead-free double perovskites for perovskite solar cells,” Sol. RRL, vol. 4, Art. no. 1900306, 2020, doi: 10.1002/solr.201900306.
S. Thawarkar, S. R. Rondiya, N. Y. Dzade, N. Khupse, and S. Jadkar, “Experimental and theoretical investigation of the structural and opto-electronic properties of Fe-doped lead-free Cs2AgBiCl6 double perovskite,” Chem. Eur. J., vol. 27, pp. 7408–7417, 2021, doi: 10.1002/chem.202004902.
A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, “Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,” J. Am. Chem. Soc., vol. 131, pp. 6050–6051, 2009, doi: 10.1021/ja809598r.
W. Xu et al., “Rational molecular passivation for high-performance perovskite light-emitting diodes,” Nat. Photonics, vol. 13, pp. 418–424, 2019, doi: 10.1038/s41566-019-0390-x.
L. Chu, W. Ahmad, W. Liu, J. Yang, R. Zhang, Y. Sun, J. Yang, and X. Li, “Lead-free halide double perovskite materials: A new superstar toward green and stable optoelectronic applications,” Nano-Micro Lett., vol. 11, Art. no. 16, 2019, doi: 10.1007/s40820-019-0244-6.
M. I. Khan et al., “Investigations on the efficiency variation of zinc and gallium co-doped TiO2 based dye sensitized solar cells,” Ceram. Int., vol. 46, pp. 24844–24849, 2020, doi: 10.1016/j.ceramint.2020.06.268.
Q. Mahmood et al., “The study of optical and thermoelectric properties of lead-free variant iodides (K/Rb)2TiI6,” J. Mater. Res. Technol., vol. 9, pp. 13043–13053, 2020, doi: 10.1016/j.jmrt.2020.09.046.
R. Ali, G. J. Hou, Z. G. Zhu, Q. B. Yan, Q. R. Zheng, and G. Su, “Predicted lead-free perovskites for solar cells,” Chem. Mater., vol. 30, pp. 718–728, 2018, doi: 10.1021/acs.chemmater.7b04036.
T. I. Al-Muhimeed et al., “New lead-free double perovskites X2GeI6 (X = K, Rb, Cs) for solar cells, and renewable energy as an alternate of hybrid perovskites,” Int. J. Energy Res., vol. 45, no. 13, pp. 19645–19652, 2021, doi: 10.1002/er.7022.
G. Flora, D. Gupta, and A. Tiwari, “Toxicity of lead: A review with recent updates,” Interdiscip. Toxicol., vol. 5, pp. 47–58, 2012, doi: 10.2478/v10102-012-0009-2.
S. Berri, “Thermoelectric properties of A2BCl6: A first-principles study,” J. Phys. Chem. Solids, vol. 170, Art. no. 110940, 2022, doi: 10.1016/j.jpcs.2022.110940.
F. Hao, C. C. Stoumpos, R. P. H. Chang, and M. G. Kanatzidis, “Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells,” J. Am. Chem. Soc., vol. 136, pp. 8094–8099, 2014, doi: 10.1021/ja5033259.
T. Krishnamoorthy et al., “Lead-free germanium iodide perovskite materials for photovoltaic applications,” J. Mater. Chem. A, vol. 3, pp. 23829–23832, 2015, doi: 10.1039/C5TA05741H.
J. C. Hebig, I. Kühn, J. Flohre, and T. Kirchartz, “Optoelectronic properties of (CH3NH3)3Sb2I9 thin films for photovoltaic applications,” ACS Energy Lett., vol. 1, pp. 309–314, 2016, doi: 10.1021/acsenergylett.6b00170.
T. Singh, A. Kulkarni, M. Ikegami, and T. Miyasaka, “Effect of electron transporting layer on bismuth-based lead-free perovskite (CH3NH3)3Bi2I9 for photovoltaic applications,” ACS Appl. Mater. Interfaces, vol. 8, pp. 14542–14547, 2016, doi: 10.1021/acsami.6b02843.
M. T. Klug et al., “Tailoring metal halide perovskites through metal substitution: Influence on photovoltaic and material properties,” Energy Environ. Sci., vol. 10, pp. 236–246, 2017, doi: 10.1039/C6EE03201J.
Y. Hu, T. Qiu, F. Bai, X. Miao, and S. Zhang, “Enhancing moisture-tolerance and photovoltaic performances of FAPbI3 by bismuth incorporation,” J. Mater. Chem. A, vol. 5, pp. 25258–25265, 2017, doi: 10.1039/C7TA08824H.
M. A. Green, A. Ho-Baillie, and H. J. Snaith, “The emergence of perovskite solar cells,” Nat. Photonics, vol. 8, pp. 506–514, 2014, doi: 10.1038/nphoton.2014.134.
M. Saliba et al., “A molecularly engineered hole-transporting material for efficient perovskite solar cells,” Nat. Energy, vol. 1, Art. no. 15017, 2016, doi: 10.1038/nenergy.2015.17.
V. Malgras, A. Nattestad, J. H. Kim, S. X. Dou, and Y. Yamauchi, “Understanding chemically processed solar cells based on quantum dots,” Sci. Technol. Adv. Mater., vol. 18, pp. 334–350, 2017, doi: 10.1080/14686996.2017.1317219.
A. E. Maughan, A. M. Ganose, M. M. Bordelon, E. M. Miller, D. O. Scanlon, and J. R. Neilson, “Defect tolerance to intolerance in the vacancy-ordered double perovskite semiconductors Cs2SnI6 and Cs2TeI6,” J. Am. Chem. Soc., vol. 138, pp. 8453–8464, 2016, doi: 10.1021/jacs.6b03207.
M. D. I. Bhuyan, R. Hossain, F. Ara, and M. A. Basith, “A first-principles study on the phase stability and physical properties of a B-site ordered Nd2CrFeO6 double perovskite,” Phys. Chem. Chem. Phys., vol. 24, pp. 1569–1579, 2022.
Kumawat, M. Rani, D. K. Meena, Anuradha, K. Kumar, and G. Arora, “Electronic, optical and magnetic properties of Gd2FeCrO6 double perovskite using DFT,” Mater. Today Proc., 2023.
Q. Mahmood, T. Ghrib, A. Rached, A. Laref, and M. A. Kamran, “Probing of mechanical, optical and thermoelectric characteristics of double perovskites Cs2GeCl/Br6 by DFT method,” Mater. Sci. Semicond. Process., vol. 112, Art. no. 105009, 2020, doi: 10.1016/j.mssp.2020.105009.
M. Faizan et al., “Electronic, optical, and thermoelectric properties of perovskite variants A2BX6: Insight and design via first-principles calculations,” Int. J. Energy Res., vol. 45, pp. 4495–4507, 2021, doi: 10.1002/er.6118.
M. G. Brik and I. V. Kityk, “Modeling of lattice constant and their relations with ionic radii and electronegativity of constituting ions of A2XY6 cubic crystals (A = K, Cs, Rb, Tl; X = tetravalent cation, Y = F, Cl, Br, I),” J. Phys. Chem. Solids, vol. 72, pp. 1256–1260, 2011, doi: 10.1016/j.jpcs.2011.07.016.
M. Asghar, M. Zanib, M. A. Khan, S. Niaz, N. A. Noor, and A. Dahshan, “Tuning of the bandgap of Rb2ScAgX6 (X = Cl, Br, I) double perovskites through halide ion replacement for solar cell applications,” Mater. Sci. Semicond. Process., vol. 148, Art. no. 106819, 2022, doi: 10.1016/j.mssp.2022.106819.
P. Blaha, K. Schwarz, G. K. H. Madsen, D. Kvasnicka, and J. Luitz, WIEN2k: An Augmented Plane Wave + Local Orbitals Program for Calculating Crystal Properties. Vienna, Austria: Vienna Univ. Technol., 2001.
J. P. Perdew, K. Burke, and M. Ernzerhof, “Generalized gradient approximation made simple,” Phys. Rev. Lett., vol. 77, no. 18, pp. 3865–3868, 1996, doi: 10.1103/PhysRevLett.77.3865.
F. Tran and P. Blaha, “Accurate band gaps of semiconductors and insulators with a semilocal exchange-correlation potential,” Phys. Rev. Lett., vol. 102, no. 22, Art. no. 226401, 2009, doi: 10.1103/PhysRevLett.102.226401.
G. K. H. Madsen and D. J. Singh, “BoltzTraP. A code for calculating band-structure dependent quantities,” Comput. Phys. Commun., vol. 175, no. 1, pp. 67–71, 2006, doi: 10.1016/j.cpc.2006.03.007.
V. M. Goldschmidt, “Die Gesetze der Krystallochemie,” Naturwissenschaften, vol. 14, no. 21, pp. 477–485, 1926, doi: 10.1007/BF01507527.
R. D. Shannon, “Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides,” Acta Crystallogr. A, vol. 32, no. 5, pp. 751–767, 1976, doi: 10.1107/S0567739476001551.
H. Tanaka, T. Oku, and N. Ueoka, “Structural stabilities of organic–inorganic perovskite crystals,” Jpn. J. Appl. Phys., vol. 57, no. 8S3, Art. no. 08RE12, 2018, doi: 10.7567/JJAP.57.08RE12.
A. Zunger, “Practical doping principles,” Appl. Phys. Lett., vol. 83, no. 1, pp. 57–59, 2003, doi: 10.1063/1.1584074.
V. I. Anisimov, J. Zaanen, and O. K. Andersen, “Band theory and Mott insulators: Hubbard U instead of Stoner I,” Phys. Rev. B, vol. 44, no. 3, pp. 943–954, 1991, doi: 10.1103/PhysRevB.44.943.
S. A. Mir and D. C. Gupta, “Systematic investigation of the magneto-electronic structure and optical properties of new halide double perovskites Cs2NaMCl6 (M = Mn, Co and Ni) by spin polarized calculations,” RSC Adv., vol. 10, no. 44, pp. 26277–26287, 2020.
H. Rached, S. Bendaoudia, and D. Rached, “Investigation of iron-based double perovskite oxides on the magnetic phase stability, mechanical, electronic and optical properties via first-principles calculation,” Mater. Chem. Phys., vol. 193, pp. 453–469, 2017.
M. Fatmi et al., “High performance double perovskites of Cs2InAgBr6 and Cs2InAgCl6 structural electronic optical and thermoelectric properties for next-generation photovoltaics,” Sci. Rep., vol. 15, no. 1, Art. no. 20851, 2025.
J. Kanamori, “Superexchange interaction and symmetry properties of electron orbitals,” J. Phys. Chem. Solids, vol. 10, no. 2–3, pp. 87–98, 1959, doi: 10.1016/0022-3697(59)90061-7.
U. Singh, J. Klarbring, I. A. Abrikosov, and S. I. Simak, “Exploring magnetism of lead-free halide double perovskites: A high-throughput first-principles study,” Phys. Rev. Mater., vol. 7, no. 11, Art. no. 114404, 2023.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 The Nucleus
This work is licensed under a Creative Commons Attribution 4.0 International License.
For all articles published in The Nucleus, copyright is retained by the authors. Articles are licensed under an open access licence [CC Attribution 4.0] meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted provided that the original published version is cited properly.
