AUTOMATING HORIZONTAL BORING AND MILLING MACHINE

Authors

  • S. A. R. Naqvi Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan
  • T. Mahmood Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan
  • M. A. Choudhry Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan
  • A. Hanif Department of Electrical Engineering, University of Engineering and Technology, Taxila. Pakistan

Abstract

Aiming at the requirements of modification for many old import machine tools in industry, the schemes suited to the renovation are presented in this paper. A horizontal boring and milling machine (HBM) involved in machining of tank AlKhalid has been modified using Mitsubishi FX-1N and FX-2N PLC. The developed software is for control of all the functions of the said machine. These functions include power on/off oil pump, spindle rotation and machine movement in all axes. All the decisions required by the machine for actuation of instructions are based on the data acquired from the control panel, timers and limit switches. Also the developed software minimize the down time, safety of operator and error free actuation of instructions.

References

D. Thapa, C.M. Park, K.H. Han, S.C. Park

and Gi-Nam Wang, Architecture for

Modeling, Simulation and Execution of PLC

Based Manufacturing System, Proceedings

of the Winter Simulation Conference (2008).

A. Mikkor, L. Roosimölder, Programmable

Logic Controllers in Process Automation, 4th

International DAAAM Conference Industrial

Engineering – Innovation as Competitive

Edge for SME, 29 - 30th April 2004, Tallinn,

Estonia.

W. Dai and V. Vyatkin, IEEE Transactions on

Automation Science & Engineering 9, No. 2,

(2012).

Z. Yiqing, Z. Zhiyong, X. Yun and W. Wen,

Research and Application of Automation

Technology in Renovation for Old Import

Machine Tool, International Technology and

Innovation Conference (2007).

V. Hajarnavis and K. Young, IEEE

Transactions on Automation Science and

Engineering 5, No. 4 (2008) 641.

W. Hu, A.G. Starr and A.Y.T. Leung,

International Journal of Machine Tools &

Manufacture 39 (1999) 1979.

Y. Altintas and B. Sencer, CIRP AnnalsManufacturing Technology 59 (2010) 41.

A.S. Tasu, Programmable Logic Controller,

th International Balkan Workshop on

Applied Physics, 5–7 July (2004) Constanţa,

Romania.

R. Schoop, R. Neubert and B. Suessmann,

Flexible Manufacturing Control with PLC,

CNC, and Software-Agents, isads, Fifth

International Symposium on Autonomous

Decentralized Systems (2001) pp.365.

M. Budha, D. Thapa, S.C. Park and Gi-Nam

Wang, Generation of PLC Ladder Diagram

Using Modular Structure, cimca, International

Conferences on Computational Intelligence

for Modeling, Control and Automation;

Intelligent Agents, Web Technologies and

Internet Commerce; and Innovation in

Software Engineering (2008) pp.1194-1198.

Downloads

Published

05-09-2012

How to Cite

[1]
S. A. R. Naqvi, T. Mahmood, M. A. Choudhry, and A. Hanif, “AUTOMATING HORIZONTAL BORING AND MILLING MACHINE”, The Nucleus, vol. 49, no. 3, pp. 187–197, Sep. 2012.

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>