Progressive Collapse of RC Frame Under Different Levels of Damage Scenarios

U. Ilyas, S. H. Farooq, A. U. Qazi, M. Ilyas


Progressive Collapse analysis of Reinforced Concrete (RC) frame was carried out using commercial software i.e. SAP2000. The RC frame consisting of nine stories was selected and designed as per Pakistan Building Code. Two damage patterns were considered for the progressive collapse analysis; damage at corner column and damage at edge column. The General Services Administration loading criterion is followed to carry out Linear Static Analysis with 40%, 80% and fully damaged scenarios. In addition to Linear Static Analysis, Nonlinear Linear Static Analysis and Nonlinear dynamic Analysis was also carried out to assess the vulnerability of the structure exposed to progressive collapse. After that results were analyzed to determine the nature and intensity of structural damage due to column failure. It was found that edge column with longer spans has more damage potential as compared with smaller spans in Linear Static Analysis. However, in Non Linear Static Analysis and Non Linear Dynamic Analysis, the hinges are at their initial stages in all cases and progressive collapse is less critical. Therefore, Linear Static Analysis based on General Services Administration guidelines is more conservative than Nonlinear Linear Static Analysis and Non Linear Dynamic Analysis.

Full Text:



GSA. Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects, The US General Services Administration, 2003.

S. M. Marjanishvili, Progressive Analysis Procedure for Progressive Collapse, ASCE, Journal of Performance of Constructed Facilities, vol. 18, No. 2, pp 7985, May 1, 2004.

M. Sasani and S. Sagiroglu, Progressive Collapse Resistance of Hotel San Diego, ASCE, Journal of Structural Engineering, Vol. 134, No. 3, pp 478488, March 1, 2008a.

M. Sasani and J. Kropelnicki, Progressive Collapse Analysis of an RC Structure, Structural Design of Tall and Special Buildings,

vol. 17, no. 4, pp. 757-771, November, 2008 (2008b).

H. Sezen and S. Brian, "Progressive Collapse Analysis of the Ohio, Union Steel Frame Building", Euro Steel, vol. 3, no.5, September, 2008.

SAP2000. 2009. SAP 2000, Advanced structural analysis program", version 15,. Computers and Structures, Inc. (CSI). Berkeley, CA, U.S.A.

F. Feng , 3-D nonlinear dynamic progressive collapse analysis of multi-story steel composite frame buildings Parametric study, Engineering Structures, vol. 32, no. 12, pp. 3974-3980, December, 2010.

ABAQUS theory manual, Version 6.7, Hibbitt, Karlsson and Sorensen, Inc. Pawtucket, R.I, (2003).

D.G. Lu, S.S. Cui, P.Y. Song and Z.H. Chen, Robustness assessment for progressive collapse of framed structures using pushdown analysis method, 4th International Workshop on Reliable Engineering Computing, ISBN: 978-981-08-5118-7

OpenSees, Open System for Earthquake Engineering Simulation: OpenSees, University of Berkeley, CA, USA, 2011.

Kim and Yu, Analysis of reinforced concrete frames subjected to column loss, Magazine of Concrete Research, vol. 64, no. 1,

pp. 2133, 2012.

S. Sagiroglu S. and M. Sasani, Progressive Collapse-Resisting Mechanism of Reinforced Concrete Structures and Effects of Initial Damage Location, Journal of Structural Engineering, vol. 140,

no. 3, March 2014, CID: 04013073

U. Ilyas, S. H. Farooq, S. Iqbal, M. Ilyas, Progressive Collapse of Reinforced Concrete frame structure under column damage consideration, Pakistan Journal of Engineering and Applied Sciences, vol 16, pp. 61-66, Jan. 2015.

S.M. Zahrai and A.R. Ezoddin, Numerical Study of Progressive Collapse in Intermediate Moment Resisting Reinforced Concrete Frame Due to Column Removal, Civil Engineering Infrastructures Journal, vol. 47, no. 1, pp. 71 88, June 2014.

Meng-Hao Tsai and Bing-Hui Lin, Dynamic Amplification Factor for Progressive Collapse Resistance Analysis of an RC Building, Struct. Design Tall Spec. Build. 18, pp. 539557, 2009.


  • There are currently no refbacks.